cAP ac

Dual-band 2.4GHz / 5GHz wireless access point designed for ceiling or wall installation, featuring two Gigabit Ethernet ports (one supporting PoE out), 802.11ac compatibility, and hardware-accelerated IPsec encryption.

Specifications

Product Code: RBcAPGi-5acD2nD
Architecture: ARM 32-bit
CPU: IPQ-4018, Quad-Core
CPU Frequency: 488–896 MHz (auto-scaling)
Switch Chip: IPQ-4018
Dimensions:

• Round case: Ø136 mm × 30 mm
• Square case: 145 × 145 × 30 mm
  Operating System: RouterOS
  RouterOS License: Level 4
  RAM: 128 MB
  Storage: 16 MB FLASH
  MTBF: Approximately 100,000 hours at 25°C
  Tested Ambient Temperature: -40°C to +50°C
  IPsec Hardware Acceleration: Supported

Wireless Capabilities

2.4 GHz Band

• Maximum Data Rate: 300 Mbps
• Number of Chains: 2
• Standards: 802.11b/g/n (Wi-Fi 4)
• Antenna Gain: 2 dBi
• Chipset: IPQ-4018

5 GHz Band

• Maximum Data Rate: 867 Mbps
• Number of Chains: 2
• Standards: 802.11a/n/ac (Wi-Fi 5)
• Antenna Gain: 2.5 dBi
• Chipset: IPQ-4018

Combined Wireless Speed: AC1200

Ethernet

• Gigabit Ethernet Ports: 2 (10/100/1000 Mbps)

Powering

• DC Inputs: 1 (PoE-IN)
• Power Input Voltage (PoE-IN): 17–57 V
• Max Power Consumption: 24 W
• Power Consumption (without attachments): 12 W
• PoE Standard: 802.3af/at
• Cooling Type: Passive

PoE-Out

• PoE-Out Port: Ether2
• PoE-Out Type: Passive PoE up to 57 V
• Current Limit (Low Voltage): 500 mA
• Current Limit (High Voltage): 400 mA
• Max Total Output: 500 mA